Aerco Modulex E8 Controls Guide Manual do Utilizador descarregar pdf (Página 16)

PR1: 11/30/12 Page 16 of 112

GF-115-C

Modulex E8 Controller and BCM

Operations and Maintenance Manual

OMM-0084_0D

AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 • Ph: 800-526- 0288

3.2.2 Basic Parameter Navigation, Selection, and Revision

When in the USER, TIME PROGRAM, EXPERT, or GENERAL Main Menu, virtually all sub-

menu items can be changed if the desired. Perform the following steps to access, view, and/or

change menu item parameters:

Parameter Change Procedure

Use Rotary Knob to navigate to desired Menu/Sub-

menu. Menu and sub-menu are indicated by two small

black arrows at bottom of LCD display pointing down to

menu/sub-menu names below display (see Figure 3-

4).

Press Program Key to access parameters in the

selected (displayed) sub-menu.

Turn Rotary Knob to sequence through the available

parameters.

To change a parameter value, press the Program Key

when desired parameter is displayed. The Change LED

will light up indicating the displayed parameter may now

be changed.

To change the displayed parameter value, turn Rotary

Knob; clockwise to increase value and counter-

clockwise to decrease the value.

To save the displayed parameter value to the controller

memory, press the Program Key. The Change LED

will turn off indicating the new value has been saved.

HOT

WATER

DHW

141.0

142.0

HOT

WATER

T-DHW

displayed

sub-menu

displayed

parameter

values

accessed

displayed

value

Displayed

Value Saved!

Example: User Menu & Hot Water Sub-menu

parameters

accessed

Cycle thru

parameters

cycle thru

values

push!

142.0

Display Detail

Description

Examples

140.0

Displayed

Sub-menu

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 111 112

Comentários a estes Manuais

Sem comentários

Aerco Modulex E8 Controls Guide Manual do Utilizador Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Aerco Modulex E8 Controls Guide